Reference: 09596_00
Clips, needle circlips for DELLORTO PHBG carburetor and others
Ideal in case of loss or breakage.
Banner
Here is the DELLORTO VHSB 34 ES carburettor, oriented enduro / cross competition like HUSQVARNA, CAGIVA 2T ... From 100cc to 250cc, flexible assembly with lever choke, with separate lubrication without vacuum connection and socket for antifreeze circuit.
Obviously, it is not a replica but a real carburetor from the Italian house DELLORTO. The fixing at the level of the pipe is in diameter Ø44mm with machined anti-slip lip, moreover the fixing for air filter remains in Ø64mm. The finish is obviously perfect at all levels on these models and the photos are there to prove it!
Summary:
-Ø of the carburetor: 34mm
- ES model
-Diameter of fixing on pipe or flexible sleeve: Ø44mm
-Diameter for air filter: Ø64mm
In addition to this, you need to know more about it.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 08649_200
A complete needle with several sizes to choose from to regulate your flow to perfection.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 08530_01
Indispensable to polish up your settings and to obtain optimum operation of your engine.
Reference: 53089_00
An extra fine screw, gasket and fuel filter pack for DELLORTO VHSA, VHSB and VHSH carburettors.
Reference: 04957_00
Indispensable for the maintenance of your tank on carburettor DELLORTO PHSB, VHSA, VHSB, VHSC and VHSH.
Reference: 52612_00
Ideal for refurbishing your DELLORTO VHSB carburetor.
Reference: 12546_00
Essential part of your VHSA carburetor VHSB and VHSH for better mixing oil / petrol!
Reference: 53090_00
The idle screw with spring to your VHSB carburetors and VHSH!
Reference: 13365_00
The aluminum tank with overflow, mounts on all VHSH and VHSB carburettors to remove your jets faster, drain faster and get more strength!
Reference: 12795_00
A replacement cover for your carburettors DELLORTO VHSB all models.
Reference: 14760_40
Bushel replacement and adjustment to your VHSB carburetors, cut 20 ° to 55 ° more aggressive choices!
Reference: 53008_00
A pack allowing to pass your carburettors with choke with lever in choke with cable or simply to repair your syteme of starter Special carburettor PHSB and VHSB.
Reference: 12630_00
Ideal in case of wear or breakage of your old float carburettor DELLORTO on VHSA and VHSH.
Reference: 182636
A special big configuration carburettor for the competition! Also available in 24, 26, 28, 30 and 32mm!
Reference: 40071000
The famous MIKUNI TMX 32.
Reference: 9804
A 34mm VHSB with high quality flat bushel, adapted to the middle of the cross, karting etc ... It is the most powerful of its category. Lever choke without separate lubrication or depression.
Reference: 9803
A 36mm VHSB with high quality flat bushel, adapted to the middle of the cross, karting etc ... It is the most powerful of its category. Lever choke without separate lubrication or depression.
Reference: 6832
This carburetor will offer excellent performance with, like all PHBE carburetors, easy and precise adjustments, a round bushel, simple fuel inlet, cable choke, with separate lubrication and without integrated vacuum. PHBE 34 BD model, ideal for supporting advanced engine preparations.
Reference: 6830
This carburetor will offer excellent performance with, like all PHBE carbs, easy and precise adjustments, a round bushel, simple gasoline inlet, cable choke, with separate greasing and without integrated depression. Model PHBE 32 HS, ideal to accompany advanced engine preparations.
Reference: 40072000
The famous TMX 35 from MIKUNI.
Reference: 201.0170
A special carburetor big configuration! Also available in 24, 26, 28 and 30mm!
Reference: 618440SC
For motorcycles, Buggy, karting, quads 2T competition requiring a large 36mm diameter carburetor!
Reference: 201.0171
A special large configuration carburetor for competition! Also available in 24, 26, 28, 30 and 32mm!
Reference: 9784
A 34mm high quality flat plug VHSB, mounted on the APRILIA 125cc RS for example as well as on some CAGIVA. Cable choke with separate lubrication without vacuum.