Reference: 09596_00
Clips, needle circlips for DELLORTO PHBG carburetor and others
Ideal in case of loss or breakage.
Banner
Here is the DELLORTO VHSB 34 QD carburettor, the most violent carburetor! Parameterized to be efficient, it is a model intended and adjusted for rotax max 2-stroke engine, flexible assembly with lever choke, without separate greasing or vacuum connection and socket for antifreeze circuit.
Obviously, it is not a replica but a real carburetor from the Italian house DELLORTO. This version is configured with FN266 needle well, 168 small pitch main jet, 60 choke jet, 30 idle jet, K27 needle. With this basic configuration, this carburetor is clearly intended for racing configurations with good diagrams and requiring more precise settings. The fixing at the level of the pipe is in diameter Ø44mm with machined anti-slip lip, moreover the fixing for air filter remains in Ø65mm. The finish is obviously perfect at all levels on these models and the photos are there to prove it!
Round valve carburetors are easier to adjust over the entire rev range, for example from 4000 to 16000 rpm. The flat bushels generally used on motocross, offer more engine response (the engine responds faster to the opening of the bushel), there are also special flat bushels versions suitable for competition, track, and high speeds ...
We note that a round bushel is the best choice for driving every day with ease of adjustment, low consumption, excellent performance at high speeds, very good stability (although the fashion is oriented to low-end flat bushels ...) . In addition, we generally recommend a flat cylinder plug with barette exhaust while the round bushel would be better suited to cylinders with booster or oval exhaust.
Summary:
-Ø of the carburetor: 34mm
-QD model
-Diameter of fixing on pipe or flexible sleeve: Ø44mm
-Diameter for air filter: Ø56mm
Delivered configured with the following elements and parameters:
-Main jet: 168
- Idle jet: 30
-Choke jet: 60
- Needle: K size 27
- Needle well: FN size 266
-Double float: 4 gr
- Needle cpl: 150
-Flat bushel: 40
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 08294_00
A practical choke, sold complete with lever support, zipper, piston, spring, axis ...
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 08530_01
Indispensable to polish up your settings and to obtain optimum operation of your engine.
Reference: 14200_30
The bushel of replacement and adjustment for your carburetors VHSB, cut 30 ° to 50 ° more aggressive choices!
Reference: 12995_50
Certified Sprinkler DELLORTO INC! Choose the true quality DELLORTO!
Reference: 53089_00
An extra fine screw, gasket and fuel filter pack for DELLORTO VHSA, VHSB and VHSH carburettors.
Reference: 15760_05
Ideal in case of wear or breakage of your old DELLORTO float on PHBH carburetor and other models. Weight of your choice.
Reference: 14415_00
The aluminum tank, mounts on all PHSB carburetors VHSB, VHSC, VHSH and VHSG to remove the faster your jets, drain faster and more strength!
Reference: 10544_00
Float balance for essential spare in case of loss or wear your old room!
Reference: 04957_00
Indispensable for the maintenance of your tank on carburettor DELLORTO PHSB, VHSA, VHSB, VHSC and VHSH.
Reference: 52612_00
Ideal for refurbishing your DELLORTO VHSB carburetor.
Reference: 12546_00
Essential part of your VHSA carburetor VHSB and VHSH for better mixing oil / petrol!
Reference: 14206_262
Essential part for the operation of your carburetor, ideal in case of wear or breakage ...
Reference: 201.0171
A special large configuration carburetor for competition! Also available in 24, 26, 28, 30 and 32mm!
Reference: 6830
This carburetor will offer excellent performance with, like all PHBE carbs, easy and precise adjustments, a round bushel, simple gasoline inlet, cable choke, with separate greasing and without integrated depression. Model PHBE 32 HS, ideal to accompany advanced engine preparations.
Reference: 9784
A 34mm high quality flat plug VHSB, mounted on the APRILIA 125cc RS for example as well as on some CAGIVA. Cable choke with separate lubrication without vacuum.
Reference: 40071000
The famous MIKUNI TMX 32.
Reference: 9803
A 36mm VHSB with high quality flat bushel, adapted to the middle of the cross, karting etc ... It is the most powerful of its category. Lever choke without separate lubrication or depression.
Reference: 618440SC
For motorcycles, Buggy, karting, quads 2T competition requiring a large 36mm diameter carburetor!
Reference: 182636
A special big configuration carburettor for the competition! Also available in 24, 26, 28, 30 and 32mm!
Reference: 6832
This carburetor will offer excellent performance with, like all PHBE carburetors, easy and precise adjustments, a round bushel, simple fuel inlet, cable choke, with separate lubrication and without integrated vacuum. PHBE 34 BD model, ideal for supporting advanced engine preparations.
Reference: 201.0170
A special carburetor big configuration! Also available in 24, 26, 28 and 30mm!
Reference: 9741
A 34mm VHSB with high quality flat plug, tuning oriented ENDURO / CROSS competition HUSQVARNA, CAGIVA ... Lever choke with separate lubrication without depression.
Reference: 40072000
The famous TMX 35 from MIKUNI.