Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
TYPE PHBH carburettor from YSN, a very good quality carburettor for a lower price than the Italian original!
Technical characteristics :
-YSN PHBH 28 BS model
-Type: male (soft mount)
-Carburetor diameter: Ø28mm
- For engines: 2 stroke
-Fixing diameter on the intake pipe side: Ø36mm with anti-slip lip machining
-Lever choke
-Air filter fixing diameter: Ø42mm threaded (possibility to put the tulip delivered with)
-No separate lubrication or depression
-Adjustable fuel inlet with filter, for hose Ø8mm max.
The carburetor comes with :
- Large main jet pitch size: 105
- Secondary / idle jet small pitch size: 55
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 53022_00
Ideal for lost or wear your old screws wealth.
Reference: 08294_00
A practical choke, sold complete with lever support, zipper, piston, spring, axis ...
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 06267_00
Replacement tank cap, essential in case of wear, breakage or loss of your old part.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 07346_00
Indispensable for the maintenance and operation of your carburetor.
Reference: 07746_65
Ideal for lost or wear or just to adjust your carburetor accurately as possible.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 9695.260
Spare essential in case of wear, loss, or fine tune your carburettor DELLORTO PHBH.
Reference: 9425_00
Spare spring bushel for carburettor DELLORTO PHBH, PHF.
Reference: 9375_00
Spare parts essential for the proper functioning of your valve / needle.
Reference: 09010_02
Ideal in case of wear or breakage of your old float carburettor DELLORTO on PHBL / PHBH.
Reference: 09374_30
A key piece essential for the proper functioning of your DELLORTO PHBH, PHBL ..., multiple cut in degrees to choose from for precise and efficient settings!
Reference: 09250_00
Ideal in case of wear, breakage or loss of your old part.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 10001-82
A tulip which increases the venturi effect and therefore the efficiency of your engine.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 52523.77
Complete gasket set for your DELLORTO PHBH carburettors.