Reference: 09596_00
Clips, needle circlips for DELLORTO PHBG carburetor and others
Ideal in case of loss or breakage.
Banner
Here is the new version of the carburettor VHST, after the success of carburetors PHBG Racing black edition, DELLORTO could not stay without releasing the racing version of the VHST flat bus.
Obviously, it is not a replica but a real carburetor of the house DELLORTO. This model therefore takes a racing configuration like, a main jet of 150, a starter jet of 60, an idle jet of 60, an S33 needle.
With this basic configuration, this carburettor is clearly intended for hyper racing configurations with large diagrams ... Apart from that, it is a carburetor with a flat bushel and a lever choke that offers excellent recoveries while preserving Very good high regimes.
It offers a lot of precision with great ease of adjustment.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 53022_00
Ideal for lost or wear your old screws wealth.
Reference: 08294_00
A practical choke, sold complete with lever support, zipper, piston, spring, axis ...
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 06267_00
Replacement tank cap, essential in case of wear, breakage or loss of your old part.
Reference: 13590_00
Special tank for big VHST carburetors PHBH, PHBL ... with double floats nonstandard size. Scheduled to be held with fitting cap.
Reference: 07346_00
Indispensable for the maintenance and operation of your carburetor.
Reference: 16863_00
Float balance for essential spare in case of loss or wear your old room!
Reference: 10825_00
Washer essential for the proper functioning of your accelerator.
Reference: 16679_00
Spring essential for the proper functioning of your accelerator.
Reference: 02265_.._DECLI
Ideal for tweaking your settings as much as possible for optimal operation of your engine.
Reference: 16663_00
Essential part for the operation of your VHST carburetor.
Reference: 16690_35
Indispensable to tweak your settings or simply change your jet.
Reference: 07746_65
Ideal for lost or wear or just to adjust your carburetor accurately as possible.
Reference: 08649_200
A complete needle with several sizes to choose from to regulate your flow to perfection.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 14416_00
Essential piece for the proper functioning of the valve spring on VHST carburetor.
Reference: 16680_265
Ideal in case of breakage, wear, or to tweak your settings.
Reference: 362.0002
POLINI nozzle box, to refine your settings. Can be mounted on DELLORTO PHVA, PHBL, PHBH, PHBN, VHSH, VHST,… And many other models!
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 52627.77
A set of gaskets essential for the refurbishment of the sealing of your VHST carburetor.