Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
Here is the PHBH carburetor from DELLORTO. PHBH models are widely used in competition, particularly on cylinders with round exhaust or boosters, they certainly offer less recovery and torque (acceleration than a flat valve carburetor for example, but they offer excellent power and very high peaks. They are also used on many original machines!
They are very stable, they are easy to adjust and of excellent quality. We only sell genuine certified dellortos!
This carburetor is a model with a lever choke, it does not have separate greasing, so you will need to either mix or have a mixture socket on the intake pipe. On the PHBH, the main jet is very easy to change, you just have to unscrew the tank cap, the jet is inside.
This high performance and solid carburetor will give you all the performance you want on your big moped, scooter or mécaboite configuration! In addition, the PHBH bodies have a threaded air filter fixing diameter of 42mm, possibility of putting the tulip supplied with the carburetor for a larger air inlet (better ventilated) of 60mm.
Technicalities :
Brand: DELLORTO
model: PHBH
Type: female, rigid
Carburetor diameter: Ø26mm
For engines: 2 stroke
Pipe side fixing Ø: Ø35mm
Starter: lever
Air filter fixing Ø: threaded Ø42mm (possibility to put the tulip supplied with)
Separate lubrication: no
Adjustable fuel inlet with filter for Ø8mm hose
The carburetor is delivered as is :
Main jet big pitch size: 110
Secondary jet / slow speed small step size: 50
Choke jet size: 70
CPL needle size: 200
Balance type float weight 6.5 grams
Needle type: X size 07
Bushel cut: 40 °
Intake tulip for air filter Ø60 / 62
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 53022_00
Ideal for lost or wear your old screws wealth.
Reference: 08294_00
A practical choke, sold complete with lever support, zipper, piston, spring, axis ...
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 07346_00
Indispensable for the maintenance and operation of your carburetor.
Reference: 07746_65
Ideal for lost or wear or just to adjust your carburetor accurately as possible.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 09996_00
Essential part of your PHBL carburetor for better mixing oil / petrol!
Reference: 09010_02
Ideal in case of wear or breakage of your old float carburettor DELLORTO on PHBL / PHBH.
Reference: 09374_30
A key piece essential for the proper functioning of your DELLORTO PHBH, PHBL ..., multiple cut in degrees to choose from for precise and efficient settings!
Reference: 09250_00
Ideal in case of wear, breakage or loss of your old part.
Reference: 08542_00
Screw essential for maintaining your bushel cover. In addition to this, you need to know more about it.
Reference: 04568_00
Essential for fixing your fuel inlet on carburettor DELLORTO PHBE pipette, PHBH, PHBL, PHF, PHM ...
Reference: 53028_00
Full idle screw carburetors for your PHBE, PHBH, PHBL ...!
Reference: 13781_00
Part of essential spare in case of breakage, wear ... certified DELLORTO.
Reference: 52523.77
Complete gasket set for your DELLORTO PHBH carburettors.
Reference: 09436_170
A complete needle with several sizes to choose from to adjust your flow to perfection.
Reference: 11771_00
Replacement tank cap, essential in case of wear, breakage or loss of your old part.