Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
Here is the MALOSSI carburetor, a PHBL 25 BS to have performance on your machine from 50 to 300cc 2 times.
Characteristics :
Ø Venturi diameter: 25mm
Ø Motor mounting diameter: 31mm
Ø Air intake diameter: 38mm
Assembly: AEMNSWXZ (flexible)
The advantage with this superb carburettor from DELLORTO is that it has a separate lubrication as well as a flexible assembly.
The choke is controlled by lever, some will see an advantage, no need to replace or lubricate controls ...
Mounts on:
50 to 300cc 2t with venturi diameter of Ø25mm.
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 53022_00
Ideal for lost or wear your old screws wealth.
Reference: 08294_00
A practical choke, sold complete with lever support, zipper, piston, spring, axis ...
Reference: 07745_00
Ideal in case of breakage or wear your old screws. This will prevent a complete change of your carburetor and make a repair cost.
Reference: 07346_00
Indispensable for the maintenance and operation of your carburetor.
Reference: 02265_.._DECLI
Ideal for tweaking your settings as much as possible for optimal operation of your engine.
Reference: 07746_65
Ideal for lost or wear or just to adjust your carburetor accurately as possible.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 06413_51
Size available 51 240! Sprinklers with INC certified scale to have an as accurate as possible carburetor adjustment. So no loss of power and especially a motor strength at the top.
Reference: 09010_02
Ideal in case of wear or breakage of your old float carburettor DELLORTO on PHBL / PHBH.
Reference: 04568_00
Essential for fixing your fuel inlet on carburettor DELLORTO PHBE pipette, PHBH, PHBL, PHF, PHM ...
Reference: 53028_00
Full idle screw carburetors for your PHBE, PHBH, PHBL ...!
Reference: 06273_00
Ideal in the event of wear, breakage or loss of your old part Single-entry model for a direct gasoline arrival in your carburation.
Reference: 08358_260
Spare essential in case of wear, loss or just to fine tune your carburettor DELLORTO PHBL.
Reference: 09644_00
Replacement valve spring only sold DELLORTO carburetor PHBL.
Reference: 53033_00
The replacement cover with screws to your DELLORTO PHBL carburetors.
Reference: 09563_00
Washer essential for the proper functioning of your throttle spring.
Reference: 13781_00
Part of essential spare in case of breakage, wear ... certified DELLORTO.
Reference: 52524.77
Complete seal set for your carburettors DELLORTO PHBL.
Reference: 09436_170
A complete needle with several sizes to choose from to adjust your flow to perfection.
Reference: 10375_150
A complete needle with several sizes to choose from to adjust your flow to perfection.
Reference: 10532_01
Indispensable for fine-tuning your settings or simply changing your idle jet.