Reference: 370.0000
Box of 10 main jets for PWK, KEIHIN, POLINI CP ... certified / controlled carburettors
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Banner
POLINI CP carburettors are real performance elements reviewed and corrected by the Italian brand. That it is in the finish, the used materials and the accessories grafted to this pretty piece of quality. Smooth and burr-free, the machining is precise and will of course optimize the performance of your engine.
Basically, when you start on a carburettor POLINI CP, we already know that we buy a carburetor much lighter than a DELLORTO, with a much better anti-emulsion worked, a still aluminum tank, an extra ordinary finish, easier settings, an excellent system of float needle leakage ....
Its body is like all the carbides POLINI, lightweight aluminum alloy, engraved in the name of the brand .. Comes as shown, this carburetor is equipped with a lever choke that you can switch to cable if you wish.
This version is an excellent base for equipped engines or origin well prepared with a racing exhaust, it is simple to adjust and will adapt perfectly to engine operating speeds up to 13 000 rpm! For very advanced engines that develop more high revs, we recommend switching to a CP EVOLUTION carburetor.
It has a socket for separate greasing, its diameter of attachment to the intake is Ø24mm. We sell and offer all the spare accessories available for POLINI carburettors, ideal for modifying and tweaking your settings.
Technical characteristics:
- 15mm carburetor, rigid mounting.
-Inlet mounting diameter: Ø24mm
-For air filter Ø46mm
-Separate grease: yes
- Main jet 56
Secondary nozzle 38
- Needle 14/22
-Boisseau 24mm, cut 30 °.
-Buse 2.6.
-Starter lever, zipper.
Reference: 370.0000
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Reference: 343.0009
The gray racing version of the tank for CP POLINI carburettors.
Reference: 343.0011
Ideal for a refurbishment or in case of leak on your carburetor CP POLINI!
Reference: 343.0012
Ideal in case of breakage, loss, wear, the tank cap and its POLINI cap for your CP carbs!
Reference: 343.0013
Ideal in case of leak, for a refurbishment of your carbide POLINI CP with tank cap!
Reference: 343.0015
Ideal in case of loss, breakage ... The replacement cup for your carburettors POLINI CP.
Reference: 343.0700
Ideal in case of loss, breakage on your carburettor POLINI CP.
Reference: 343.0014
Ideal in case of wear, leakage or breakage in your carburetor Polini CP.
Reference: 343.0800
All sizes available, ideal for refurbishing or adjusting your POLINI CP carburettor.
Reference: 343.0005
The complete wealth screw for CP POLINI carburettors.
Reference: 343.0006
The best in case of loss or breakage on your carburetors POLINI CP!
Reference: 343.0400
The best to adjust or repair your POLINI CP carburetor!
Reference: 343.0016
Ideal to repair a worn carburetor, broken ... Delivered complete!
Reference: 343.0600
Ideal for adjusting your POLINI CP carburettors, or changing a worn needle!
Reference: 343.0004
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0002
Ideal to refurbish your carburetor POLINI CP.
Reference: 343.0001
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0019
A cable choke kit that mounts on all POLINI CP or PWK carburettors regardless of the brand !!!
Reference: 343.0338
Ideal for adjusting your POLINI CP carburettors!
Reference: 343.0022
The 90 ° tube kit, ideal in case of breakage or to change your straight assembly on your POLINI CP, PWK carburettors ...
Reference: 201.1501
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices!
Reference: 2508
The simple version of the 15mm DELLORTO carburetor! The flexible mounting PHBG with lever choke.
Reference: 6315
The simple version of the 14mm DELLORTO PHVA DD carburetor! The flexible mounting PHBG with lever choke.
Reference: 2616
The most racing version of the 15mm DELLORTO carburettors! The flexible mounting PHBG with aluminum tank, quick change plug, intake tulip ...
Reference: 2043
The real SHA 15mm from dellorto with a lever choke but without the possibility of separate lubrication!
Reference: 2045
The real SHA 15mm from DELLORTO with a cable choke and without separate lubrication!
Reference: 201.1502
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices! Ideal to keep its original air box fixing 34 to 36mm.
Reference: 165812
SHA carburettor TUN 'R with high quality!
Reference: 2013
The real SHA 15mm dellorto with a choke lever and a possibility of separate greasing!
Reference: 2518
The rigid version of the DELLORTO 15mm carburettor in PHBG, with a lever choke and without the possibility of separate lubrication.