Reference: 370.0000
Box of 10 main jets for PWK, KEIHIN, POLINI CP ... certified / controlled carburettors
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Banner
Here is the basic standard version of the 15mm CP type POLINI MOTORI house, it is a high-performance carburetor, made in Italy 100% and not in China, high quality that is easier to adjust!
This version is the standard, it has a separate grease outlet and a plug for depression, its starter is a lever pull cable model choices.
Basically, when you start on a carburettor POLINI CP, we already know that we buy a carburetor much lighter than a DELLORTO, with a much better anti-emulsion worked, a still aluminum tank, an extra ordinary finish, easier settings, an excellent leak-free needle valve system, ...
This version is a superb base for the engines equipped or origin well released with a racing exhaust, it is simple to adjust and will be perfectly suitable for engine operating speeds up to 13000 maximum!
You can modify it to your sauce with all the accessories of adjustment that we sell, big diameter tulips exist also for the installation of the filters with big entrance and to improve the venturi effect!
A tank with cap is also available for faster adjustment. The plug is a D / 24mm, cut 30 °, nozzle 70. The needle is a CP 14 22, one after well in d.2.6! You'll understand, it's a carburetor decidedly sporty with a really nice price! 2 shutters are delivered to you if you do not want to use the sockets!
Summary of settings and options :
Options: caps under the tank, special machining, large diameter tulip and settings
Ø15mm and Ø22mm output (conical machining competition)
Mounting: Flexible for pipe diameter 25mm level fixation
Starter: cable or lever choices
Vacuum or separate greasing: Yes and yes
Main jet: POLINI CP 70
Needle: CP 14 22
Secondary sprinkler: POLINI 36
Bushel diameter 24mm cut 30 °
Parts after needle well 2.7-19
Wealth: tightly moderately and loosely 0.75 turns (3/4 of a turn)
Air filter Ø46mm without tulip
For gasoline hose diameter 6mm (or 5 in forcing)
Needle clips in the middle on 5 notches
Reference: 370.0000
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Reference: 343.0009
The gray racing version of the tank for CP POLINI carburettors.
Reference: 343.0011
Ideal for a refurbishment or in case of leak on your carburetor CP POLINI!
Reference: 343.0012
Ideal in case of breakage, loss, wear, the tank cap and its POLINI cap for your CP carbs!
Reference: 343.0013
Ideal in case of leak, for a refurbishment of your carbide POLINI CP with tank cap!
Reference: 343.0015
Ideal in case of loss, breakage ... The replacement cup for your carburettors POLINI CP.
Reference: 343.0700
Ideal in case of loss, breakage on your carburettor POLINI CP.
Reference: 343.0014
Ideal in case of wear, leakage or breakage in your carburetor Polini CP.
Reference: 343.0800
All sizes available, ideal for refurbishing or adjusting your POLINI CP carburettor.
Reference: 343.0400
The best to adjust or repair your POLINI CP carburetor!
Reference: 343.0016
Ideal to repair a worn carburetor, broken ... Delivered complete!
Reference: 343.0600
Ideal for adjusting your POLINI CP carburettors, or changing a worn needle!
Reference: 343.0004
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0002
Ideal to refurbish your carburetor POLINI CP.
Reference: 343.0001
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0019
A cable choke kit that mounts on all POLINI CP or PWK carburettors regardless of the brand !!!
Reference: 343.0338
Ideal for adjusting your POLINI CP carburettors!
Reference: 343.0022
The 90 ° tube kit, ideal in case of breakage or to change your straight assembly on your POLINI CP, PWK carburettors ...
Reference: 201.1502
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices! Ideal to keep its original air box fixing 34 to 36mm.
Reference: 2616
The most racing version of the 15mm DELLORTO carburettors! The flexible mounting PHBG with aluminum tank, quick change plug, intake tulip ...
Reference: 2518
The rigid version of the DELLORTO 15mm carburettor in PHBG, with a lever choke and without the possibility of separate lubrication.
Reference: 2013
The real SHA 15mm dellorto with a choke lever and a possibility of separate greasing!
Reference: 2043
The real SHA 15mm from dellorto with a lever choke but without the possibility of separate lubrication!
Reference: 6315
The simple version of the 14mm DELLORTO PHVA DD carburetor! The flexible mounting PHBG with lever choke.
Reference: 2045
The real SHA 15mm from DELLORTO with a cable choke and without separate lubrication!
Reference: 2508
The simple version of the 15mm DELLORTO carburetor! The flexible mounting PHBG with lever choke.
Reference: 201.1503
Ideal to accompany a motor origin or slightly prepared CP version POLINI, rigid.
Reference: 165812
SHA carburettor TUN 'R with high quality!