If you want to preserve low consumption while having more performance than with a SHA model for endurance or the road for example, the PHBG model will be a very good compromise. This low-cost carburetor is of very high quality and has a multitude of adjustments: richness screw, idle jet, needle valve ...
This model is the AS (also exists in BD or BS model), it is rigidly mounted with a lever choke, you can also switch it to a cable choke without difficulty. Compared to the SHA carburetor, this model is much more precise, efficient in recovery, acceleration and peak speed. This model does not have separate lubrication.
Advice : accompany it with a 15mm pipe, carbon valve slats, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Provide a range of jets from 71 to 87 depending on the filter used.
The carburetor is delivered as such :
Main jet small standard pitch: 70
40 ° cutting bushel
Needle well AU 262
Idle jet 50
Choke jet 60
Float in 4 grams
These accessories can be changed for better tuning, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Summary :
Phbg AS model
Size 15mm
Pipe fixing diameter: Ø24mm
Assembly: rigid
Starter: lever (can also be used as a cable choke)
Fixing diameter for air filter: 32mm X 1.25mm threaded (we can also put tulips of different sizes)
Spare parts and adjustments
