- -€10.00
Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
The SHA 15.15 C carburettor is a simple, well-known and very functional model. With its diameter of 15mm it will be more than enough on mopeds (PEUGEOT 103, MBK 51...) small configurations such as exhaust, small kit or preparation, variator... If you are looking for a carburettor that does not have separate lubrication , simple to adjust, solid, cheap, quite powerful, which consumes little and makes little noise! This carburetor is for you.
This version C is a version with manual cable choke (without lever) which does not have a separate lubrication inlet, this version also has an adjustable straight aluminum fuel inlet. There is also the G and standard version. This carburettor has an integrated air filter and fuel filter delivered and included in the price. This carburettor has a horizontal accelerator and choke cable arrival (90° angled), you can easily install vertical or other arrivals.
Guaranteed high quality, genuine DELLORTO carburettor, it was even used as original equipment on certain machines!
Advice : accompany it with a 15mm pipe, carbon type valves (thickness to choose according to your engine). Try to align valves and pipe as well as possible. Delete one or two air filter grids maximum or, for the best, mount a racing air filter, and provide a range of nozzles from 69 to 77 in small Ø5mm steps. This carburetor can be very efficient.
This carburetor is equipped with these parameters :
- Bushel size 12
-DELLORTO standard jet of 68 in small pitch
Summary :
-Diameter of the carburettor on the intake pipe: 19mm
-Mounting: Rigid
-Separate lubrication: no
-Diameter fixing air filter 59mm
-Cable starter
-Carburetor diameter 15mm
-Air filter and fuel filter integrated into the carburettor
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53051_00
A very good quality filter from DELLORTO especially for SHA.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 06117_00
Original DELLORTO filter (filter element) for SHA carburetor.
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 1381
TUN 'R air filter for carburettor, ideal for offering more performance to your engine equipped with a 15 or 16mm SHA!
Reference: 260269
TUN 'R air filter for SHA carburetor, it allows better filtration and better performance.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 478327
TUN 'R Racing air filter for SHA carburettor, a larger air reserve for more performance, a protective cover for water and a real filter element!
Reference: 472624
A complete box to have the most precise settings possible.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 06475_00
The pipette spare aluminum right version for your carburettors DELLORTO SHA.