Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
The standard SHA 15.15 carburetor could not be simpler and more functional. With its diameter of 15mm it will be more than sufficient on small configurations such as exhaust, small kit or preparation. If you are looking for a carburetor that does not have separate lubrication, easy to adjust, solid, cheap, efficient enough that consumes little, makes little noise! This carburetor is for you. This standard version is a version with manual lever choke (without cable) which does not have a separate greasing inlet, this version also has a plastic fuel inlet bent at 45 °. There is also version G and C. This carburetor has an integrated air filter and fuel filter delivered and included in the price. This carburetor has a vertical accelerator cable inlet, you can easily install a horizontal inlet. The choke has automatic disengagement, as soon as you accelerate fully, the choke jumps on its own, no need to lower the lever manually.
Advice : accompany it with a pipe of 15, carbon type valves (thickness to be chosen according to your engine). Try to align the valves and pipe as well as possible. Remove one to two maximum air filter screens and plan a nozzle set from 69 to 77 in small steps. This carburetor can be very efficient.
Type of material fitted to this carburetor when you receive it :
Bushel size 12
Dellorto standard jet 68 in small step
Summary :
Carburetor fixing diameter on intake pipe: 19mm
Assembly: rigid
Ø air intake 59mm
Separate lubrication: no
Starter: lever (automatic disengagement)
Carburetor diameter 15mm
Air and fuel filter integrated into the carburetor
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53051_00
A very good quality filter from DELLORTO especially for SHA.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 06117_00
Original DELLORTO filter (filter element) for SHA carburetor.
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 2616
The most racing version of the 15mm DELLORTO carburettors! The flexible mounting PHBG with aluminum tank, quick change plug, intake tulip ...
Reference: 6315
The simple version of the 14mm DELLORTO PHVA DD carburetor! The flexible mounting PHBG with lever choke.
Reference: 201.1502
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices! Ideal to keep its original air box fixing 34 to 36mm.
Reference: 2013
The real SHA 15mm dellorto with a choke lever and a possibility of separate greasing!
Reference: 2508
The simple version of the 15mm DELLORTO carburetor! The flexible mounting PHBG with lever choke.
Reference: 2045
The real SHA 15mm from DELLORTO with a cable choke and without separate lubrication!
Reference: 201.1503
Ideal to accompany a motor origin or slightly prepared CP version POLINI, rigid.
Reference: 2518
The rigid version of the DELLORTO 15mm carburettor in PHBG, with a lever choke and without the possibility of separate lubrication.
Reference: 201.1501
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices!
Reference: 165812
SHA carburettor TUN 'R with high quality!