Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Banner
The carburetor SHA 15.15 G is a model could not be more simple and functional. With its diameter of 15mm it tightened largely sufficient on small configurations such exhaust, small kit or preparation. If you find a carburetor with the separate lubrication, simple to adjust, strong, cheap, good enough that consumes little, done little noise! This carburetor is for you. This version G is a manual choke lever version (without cable) which has a separate lubrication of arrival (it is not mandatory to put the carburetor comes with a plug to seal the arrival), this release also features an aluminum finish gasoline. There are also the standard version and C. It has a carburetor air filter and fuel filter integrity and comes included in the price. This carburettor has an arrival of cable vertical accelerator, you can ask a horizontal without problems arrived. The choke has automatic engagement dice, dice you full throttle, choke jumps alone, no need to go down the lever manually.
Council: accompany by a pipe 15, valves carbon type (thickness choose according to your engine). Try to align the best valves and pipe. Delete a two grids maximum of air filter and plan a nozzle range from 69 to 77 in small step. The carburetor can be very powerful.
Type of equipment fitted to the carburetor when you receive:
Boisseau size 12
Standard jet Dellorto of 68 in small step
summary:
Carburetor mounting diameter intake pipe: 19mm
Mounting: rigid
Separate greasing: yes but not required
Ø 59mm air intake
Starter: Lever
Diameter 15mm carburettor
Air filter and carburetor gasoline integrates
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53051_00
A very good quality filter from DELLORTO especially for SHA.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 06117_00
Original DELLORTO filter (filter element) for SHA carburetor.
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.