Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
The SHA 14.14 L carburetor is a simple model, less known than the 15.15 but just as functional. With its diameter of 14mm it will be more than sufficient on mopeds (PEUGEOT 103, MBK 51 ...) small original configurations ... If you are looking for a carburetor that does not have separate lubrication, very easy to adjust, solid, inexpensive, which consumes little and makes little noise! This carburetor will be perfect.
This L version is a version with manual cable choke (with lever) which does not have a separate greasing inlet with a straight outlet aluminum fuel inlet pipette. There is also the standard L version. This carburetor has a horizontal throttle cable inlet (bent at 90 °), you can easily ask vertical or other arrivals.
High quality guaranteed, genuine DELLORTO carburettor, it was even used as an original fitment on some machines! The starter is therefore manual but with an automatic system which allows the latter to be removed thanks to a spring + valve system. Equipped with an integrated fuel filter with its aluminum pipette, straight diameter for Ø6mm hose (5mm in forcing).
This carburetor is equipped with these parameters :
-Boisseau size 12
-Standard DELLORTO 68 nozzle in small steps
Summary :
-Diameter for fixing the carburetor on the intake pipe: 19mm
-Mounting: rigid
-Separate greasing: no
-Diameter fixing air filter 59mm
-Starter lever with automatic stop
-Diameter of the carburetor 14mm
-Fuel filter integrated into the carburetor with straight aluminum pipette
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 06475_00
The pipette spare aluminum right version for your carburettors DELLORTO SHA.
Reference: 09604_00
Cover with seal and replacement spring for your carburettors DELLORTO SHA all models.