- New
Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 06475_00
The pipette spare aluminum right version for your carburettors DELLORTO SHA.
Reference: 09604_00
Cover with seal and replacement spring for your carburettors DELLORTO SHA all models.
Reference: 2616
The most racing version of the 15mm DELLORTO carburettors! The flexible mounting PHBG with aluminum tank, quick change plug, intake tulip ...
Reference: 201.1503
Ideal to accompany a motor origin or slightly prepared CP version POLINI, rigid.
Reference: 165812
SHA carburettor TUN 'R with high quality!
Reference: 201.1502
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices! Ideal to keep its original air box fixing 34 to 36mm.
Reference: 6315
The simple version of the 14mm DELLORTO PHVA DD carburetor! The flexible mounting PHBG with lever choke.
Reference: 201.1501
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices!
Reference: 2013
The real SHA 15mm dellorto with a choke lever and a possibility of separate greasing!
Reference: 2043
The real SHA 15mm from dellorto with a lever choke but without the possibility of separate lubrication!
Reference: 2044
Genuine SHA 13mm DELLORTO carburettor with lever choke but without the possibility of separate lubrication!
Reference: kit_carburation_av10_sha_droit_eco
Economical quality carburetion kit in 15mm for MBK 51 engine with straight pipe!
Reference: 2508
The simple version of the 15mm DELLORTO carburetor! The flexible mounting PHBG with lever choke.
Reference: kit_carburation_av10_sha_coudée_eco
Economical quality carburetion kit in 15mm for MBK 51 engine with bent pipe!
Reference: 2183
Genuine SHA 14.14 carburetor from DELLORTO, model L with aluminum pipette, a lever choke and without separate greasing.
Reference: 01682
Real carburettor SHA DELLORTO at 14.14, L model with standard black plastic pipette angled 45 °, a choke lever, without separate greasing.
Reference: 1515
Genuine DELLORTO SHA model 14.12 L carburettor with lever choke but without the possibility of separate lubrication. In addition to this, you need to know more about it.