Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
The carburetor SHA 14.14 The Standard is a simple and uses less gasoline model, less known than 15.15 but equally functional. With its diameter of 14mm it will be more than enough for mopeds (Peugeot 103, MBK 51 ...) small original configurations ... If you need a carburetor do not have the separate lubrication, easy to adjust, strong, cheap, which consumes very little and makes some noise! The carburetor will be perfect.
This standard L version is a version with manual choke cable (with leverage) that does not have a separate lubricating finish with a gas inlet pipette plastic cranked out 45 °. There is also the version of L. This carburetor has arrived accelerator cable angled to 120 ° so slightly tilted up, you can ask without problems arrivals vertical, angled 90 ° or more.
High quality guarantee, genuine carburettor DELLORTO, it was even used as original equipment on some machines! The starter is manual but an automatic system that allows the removal of the latter by a spring + valve system. With an integrated fuel filter with its plastic pipette, angled 45 ° diameter hose Ø6mm (5mm forcing).
The carburetor is equipped with these settings:
-Boisseau Size 12
-Gicleur Standard DELLORTO 56 in small step
summary:
Carburetor mounting -Diameter on intake pipe: 19mm
Flush: Hard
Separated -Graissage: no
-diameter Mounting air filter 59mm
With automatic stop lever -Starter
-diameter 14mm carburettor
-Filter Integrated gasoline to the carburetor with black plastic pipette angled 45 °
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 360.0003
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 06475_00
The pipette spare aluminum right version for your carburettors DELLORTO SHA.
Reference: 09604_00
Cover with seal and replacement spring for your carburettors DELLORTO SHA all models.
Reference: 1515
Genuine DELLORTO SHA model 14.12 L carburettor with lever choke but without the possibility of separate lubrication. In addition to this, you need to know more about it.
Reference: 2152
A version of the SHA 16.16 with lever choke and separate lubrication.
Reference: 2150
The famous SHA 16.16 with cable choke. Ideal on your PEUGEOT 103, MBK 51 type mopeds... More efficient than a 15mm, without reaching the price of a PHBG!
Reference: 2044
Genuine SHA 13mm DELLORTO carburettor with lever choke but without the possibility of separate lubrication!
Reference: 111050
A small carburetor tyep origin for the mini motorcycles cross YAMAHA PW50, ideal in case of wear or dysfunction of your old part.
Reference: 961010S
A carburetor origin pocket a small price.
Reference: 165812
SHA carburettor TUN 'R with high quality!
Reference: 2183
Genuine SHA 14.14 carburetor from DELLORTO, model L with aluminum pipette, a lever choke and without separate greasing.
Reference: 485400
A small carburetor origin for Pocket Bike, ideal in case of wear or malfunction of your old room.
Reference: 2013
The real SHA 15mm dellorto with a choke lever and a possibility of separate greasing!
Reference: 2043
The real SHA 15mm from dellorto with a lever choke but without the possibility of separate lubrication!
Reference: 1230
DELLORTO PHBN 16 BT carburettor with separate lubrication
Reference: 138705
An Asian copy of SHA 15.15, decent quality at a very low price!
Reference: 2798
Carburetor of 25 MALOSSI with separate lubrication!
Reference: 2045
The real SHA 15mm from DELLORTO with a cable choke and without separate lubrication!
Reference: 01682
Real carburettor SHA DELLORTO at 14.14, L model with standard black plastic pipette angled 45 °, a choke lever, without separate greasing.