Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Banner
The SHA 14.12 L carburettor could not be simpler and more functional. With its diameter of 14mm it will be more than sufficient on small configurations such as exhaust, small kit or entirely original. If you are looking for a carburetor that does not have separate lubrication, easy to adjust, solid, inexpensive, which consumes little, makes little noise! This carburetor is for you. This version is equipped with a manual lever choke (without cable) which does not have a separate greasing inlet, this version also has a plastic fuel inlet bent at 45 °.
This carburetor has an integrated air filter and fuel filter. This carburetor has a vertical accelerator cable inlet, you can easily install a horizontal inlet. The choke has automatic disengagement, as soon as you accelerate fully, the choke jumps on its own, no need to lower the lever manually. Clearly, an excellent little carburetor ready to be installed.
Type of material fitted to this carburetor when you receive it :
- Bushel size 2
- Dellorto standard 57 jet in small steps
Technical summary :
-Carburetor model 14 (outlet diameter pipe side) and 12 (inlet diameter filter side)
-Diameter for fixing the carburettor on the intake pipe: Ø18mm
-Rigid mounting with white nylon ring
-Diameter external air intake Ø59mm
-Separate greasing: no
-Starter lever (automatic disengagement)
-Air and gasoline filter integrated into the carburetor
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 53051_00
A very good quality filter from DELLORTO especially for SHA.
Reference: 09249_00
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 06117_00
Original DELLORTO filter (filter element) for SHA carburetor.
Reference: 126140
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 10146_00
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 10638
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
Replacement screws to clamp on all models carburettors DELLORTO SHA.