- There are no more items in your cart
- Shipping Free
- Total €0.00
We finally offer them to you after much demand from the most equipped among you, the genuine NGK B95 EGP competition spark plugs! This range which is between the B9EGP and the B10 EGP temperature is ideal for average weather (14/17 ° C)! In average weather with a well-tuned engine and good cooling, a B10 or B105 EGP type spark plug will not work properly ... You therefore need a warm enough row. And a row of type 8 or 85 will be too hot and risk creating a lot of mechanical problems! These candles are ultra efficient! It adopts a very special technology both internally and externally. We advise you on the most advanced engines !!! They are relatively fragile especially in case of bad settings… They are made to run at high speeds with a perfectly tuned engine.
The B95 EGP was created for engines with a speed range of over 10,000 rpm. You will be able to notice on the photo the smoothness of the electrode which is micro welded lazer! This finesse makes them ultra efficient both in terms of ignition power and self-cleaning but also in explosion cleanliness. By its very small does not disturb the compressed gases nor the explosion. This NGK competition spark plug has a special insulator design to prevent the “blowing” of the spark by gas turbulence; it withstands the most extreme conditions and is very different from normal candles.
The competition spark plugs have very particular electrode designs (oblique ground electrodes, ring electrodes) as shown in the photograph. This sophisticated design helps prevent damage caused by electrodes destroyed by vibration. “Specialties” have a cost. Specially developed and manufactured spark plugs for competition are of course more expensive than stock spark plugs. This is explained: the demand is not expandable because these spark plugs are only used by professional teams, semi-professional teams, engine preparers.
- Index: cold in 95
-Reserved for the engine: very equipped / competition / run ...
-Resistance: no (without r)
What does B95 EGP mean :
B = Ø14mm base (to be tightened with 20.8mm key)
95 = cold thermal index
E = Thread length 19.00mm (long base)
GP = central gold-palladium electrode of special shape / platinum tip