
Reference: 152296
Reinforced bearing 6302QR C3 steel cage original size P2R for MBK 51 / motobecane AV10 / AV7
Very good quality bearing with steel cage. Can handle most configuartions without problems.
Banner
Set of two original size TPI bearings, brand with good quality / price ratio, reinforced polyamide cage in 6302. Bearing clearance: C3. Suitable for original or very prepared configurations (not exceeding 13,500 / 14,000 rpm which will require C4). Comes with a set of good quality lip seal! Mounts on MOTOBECANE AV10 / AV7 / MBK 51 all models. Proposed by the French CGN.
Reference: 152296
Very good quality bearing with steel cage. Can handle most configuartions without problems.
Reference: rrd_cage_51
High performance RRD needle cage for your moped.
Reference: 480974
Excellent in case of wear of your old nut.
Reference: 492708
Set of two bearings + oil seals for low engine MBK 51 / AV10 / AV7
Reference: 502028
Hexagonal ignition nut ideal in case of breakage or wear for a good quality and safe reassembly.
Reference: 5068
A handy tool to remove most of your crankshaft bearings facilements or another.
Reference: 516947
For a much more resistant and waterproof, more reliable and easier refurbishment.
Reference: 285.0110
High-end spinnaker seals for MBK 51.
Reference: 66 3276B
The best needle cage for your engine.
Reference: 4497
Reinforced needle cage with improved lubrication.
Reference: 4121
A reinforced needle cage with improved lubrication which will therefore be able to support very large kits without spending a lot of time.
Reference: 496273
Very good quality bearing with polyamide cage. Can handle most configuartions without problems.
Reference: 489602
Spare part essential in case of loss, wear ... of your old nut!
Reference: 541050O
A very practical tool to remove the bearings more easily from your crankshaft or other.
Reference: RST.325
Reinforced model and of very high quality, ideal to avoid any breakage or seizing of your crankshaft.
Reference: 12200213
Ideal to accompany a prepared engine! Spare pack for housings / crankshaft BIDALOT G1, G2 OPEN.