Reference: 203.1501
Adapter, air filter tulip POLINI CP Ø44 to 64mm aluminum for MIKUNI carburetors
Ideal to fit your Ø64mm air filter on your POLINI CP carburettor.
Banner
The tulip horn is a good air filter thanks to its shape, it allows better suction, takes up little space and has a rather different and discreet aesthetic look. Always remember to oil your air filter with an adequate oil. It is very solid thanks to its ABS material and its special screw fixing.
In case you have lost your horn mounting system, here is the special E8 spare part .
Dimensions :
A: Fixing on carburettor: Ø32mm
B: 68.5mm
C: 72mm
Recommended on: PHBG dellorto
malossi description:
recommended on model
DELLORTO PHBG D. air filter fixing 32mm
MBK AV10, 51, AV10, EV50
PEUGEOT 103 SPX / RC X / SP / CLIP /.... XP / XP LC / HOLLYWOOD / AVENGER / 104 / 105
RED FILTER more oxygen to the engine
These are two requirements in disagreement with each other, which can be reconciled in a first quality filter only with careful studies, great experience and with the use of the best materials.
Therefore, it is not a case that all the major manufacturers start from the design of the filter, which is the first component of the "breathing chain" of the engine, to obtain engines with high performance suitable for competitions.
Being the undisputed leader, either in the manufacture of motors for competition, or in the design of special transmission systems, Malossi has been able to design the best scooter filter made so far.
It is called RED FILTER and it is characterized by a carrying structure with reticule, very light and removable by a filtering piece in expanded polyurethane with open cells, self-extinguishing and with great accumulation capacity.
This filter, which in a few minutes can be mounted on any scooter because it is supplied with the special fixings that allow it to be fixed in the best position, has ducts and surfaces expressly calculated to obtain the maximum performance possible for all commercial scooters. In addition, it also guarantees a high yield consistency.
Carrying out the necessary and simple periodic cleaning operations, RED FILTER can always ensure perfect engine breathing, guaranteeing at the same time a longer life.
We must not forget the advantages with regard to pollution: an engine that breathes better is an engine that pollutes and consumes less.
Red Filter E8
E8 air filter with filtering foam in expanded polyurethane, flame retardant, self-extinguishing, applicable to dell'Orto PHBG carburettors
The quality that confirms success
Very often we neglect the simplest and most obvious components of our engine, whereas with small operations we could enable it to work better, to offer better performances and to live longer.
Consider, for example, the transmission system that distributes the “charge” of air and fuel that is strictly tied to the performance provided by the engine.
The task of the filter is of vital importance, since on the one hand it must prevent any impurity from entering the engine (it should be noted that an impurity can cause serious damage very quickly); on the other, it must allow the author the best breathing possible, without suffocating him.
Reference: 203.1501
Ideal to fit your Ø64mm air filter on your POLINI CP carburettor.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 343.0035
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: 203.0170
POLINI air over-filter bag, allows the filtration of 90% of the impurities which usually leave directly in the air filter.
Reference: 9911680
A good quality filter with several diameters to choose from to best suit your carburetor.
Reference: 475817
Air filter in nice design. with several colors to choose to best adapt to your gear.
Reference: 928.465.004
Ideal for modifying, increasing or reducing your air intake on the POLINI large volume gearbox!
Reference: 467817
Air filter with simple design but efficient performance.
Reference: 440956
An air filter with a worked design with very good performance.
Reference: 203.0064
A very high-end filter that will allow you maximum performance of your engine without worrying about impurities.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 0413260
MALOSSI E16 air filter to improve performance on the track!
Reference: 343.0026
Ideal to fit your Ø60 or 62mm air filter on your POLINI CP carburettor.
Reference: 203.0062
Ideal for positioning your filter at 30 °, a high-end filter for optimal protection of your engine against external impurities.
Reference: 203.0090
A competition air filter outlet bent at 30 °, high-end model with several sizes of fixing choices.
Reference: 203.0164
Ideal to accompany a POLINI CP carburetor, high quality EVOLUTION large volume filter!