Reference: 203.0113
Air filter, blue anodized POLINI NEW foam horn with 30 ° angled cover (carburetor mounting Ø Ø32 / 37/42 and 46mm)
A high quality air filter with a nice aesthetic, for better protection and air intake for your engine!
Banner
The best solution to prepare your mécaboite is sometimes to prepare your original air box. Indeed, it will be much less noisy than a horn and will take less water, dust and other foreign bodies…. And above all you will have a large reserve of air. Thanks to this ATHENA Racing foam, you will be able to take more air and therefore more performance at the carburation level. This foam is mounted in the original air box of DERBI Super-Motard, Senda, Cross, Enduro, X-trem, X-race, DRD ... and many other vehicles.
Remember to review your carburetor settings after fitting this type of filter. To prepare an air box, the most appropriate solution is to install racing foam, and reopen the air inlet (we generally recommend an inlet of 5X10cm instead of the 3 small original holes, you can add a grid with 4 screws to prevent something from falling into the box).
You will find by clicking here the cleaning sprays and oils for air filter.
Reference: 203.0113
A high quality air filter with a nice aesthetic, for better protection and air intake for your engine!
Reference: 203.0090
A competition air filter outlet bent at 30 °, high-end model with several sizes of fixing choices.
Reference: 31319
A single layer of filtration foam ideal for preparing your original air box.
Reference: 473483
Ideal for optimizing your filtration while bringing a personalized touch to your engine!
Reference: 115050B
K&N green horn type air filter, 45 ° angled but 360 ° adjustable at half the elbow! A very good filter that breathes well.
Reference: 0411459
A filter often used in competition for that high quality foam and are look neat / racing.
Reference: 2640081
A very well designed filter with multiple size choices to best suit your carburetor.
Reference: 490405
Cut out teknix air filter foam, size 33X66cm / thickness 10mm uncompressed.
Reference: 04 9424.K0
MALOSSI E5 air filter with black cover. Available for PHVA, PHBN, PHBL, MIKUNI, PHVB, PHF, PHBH ...
Reference: 468867
DOPPLER Air Box white, blue, gray, black or red. For pure air while keeping a racing design.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 475817
Air filter in nice design. with several colors to choose to best adapt to your gear.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 203.0029
This POLINI EVOLUTION air filter allows an improved breathing / aspiration of your motor.
Reference: 484132
Air filter foam teknix to cut, size 30X21cm.
Reference: 203.0166
A filter with a large reserve of air, special large PWK carburetor, PHBH, PHBL, POLINI CP with tulip ... and other models. Ideal for a motor prepared competition!