TORSEN WD swingarm reinforcement by POLINI Motori MINARELLI / YAMAHA Horizontal motor (nitro, aerox, ovetto, neos, ...) 6mm

With the birth of this quality piece, POLINI has set the bar very high! Inspired forks MOTOGP, the WD TORSEN for all engines MINARELLI / YAMAHA Horizontal long will harden the crankcase avoiding twists that on large motors can be up to breakage of the crankcase. What will bring you TORSEN WD POLINI? Strength of the engine and increased road holding, all with a design ultra racing and a featherweight.



Thanks to this connection between the chassis and the rear wheel, the WD TORSEN ensures better driving stability and better control scooter in curves while simultaneously reducing the asymmetric tire wear.

Straight out of the POLINI factories it is on a piece Made In ITALY.



The WD TORSEN attaches to the front with two screws to the point, standard fixing pots and back with a nut that attaches to the axis of the existing wheel. The particularity of this is that rear mounting for better association between TWD bearing and axle nut, and an axial compensator is used to correct the axis of the arm to prevent vibration or malfunction.



Finally, we will say that this piece is a must! Whether for its quality, its design, its practicality, this is a security element for your 2 wheels. Comes with screws, washers, silent blocks ...

Please note that this room is specifically designed to be fitted with exhaust devices POLINI SCOOTER TEAM 2 and BIG EVOLUTION (70/80 / 94cc). It may be your only escape if it is not one of the models mentioned above, this piece is not assembled. No recovery will be made!

Version 6mm. Itself on:

APRILIA: AREA 51 - RALLY 50 LC - SR 50 - SR 50 LC Stealth / Racing / NETSCAPER - SR 50 WWW
BENELLI 491 RR-50-SP-RACING SPORT - K2 50 LIQUID COOLED
BETA ARK LC 50-K SERIES - EIKON 50
ITALJET: DRAGSTER 50 LC
MBK: NITRO 50 H2O - H2O dal NITRO 50 1996->
YAMAHA: AEROX 50 H2O - H2O dal AEROX 50 2004-> - JOG RR LC 50 - 50 JOG R