- -25%

Banner
Cable greasing tool BUZZETTI Professional. This tool as its name suggests allows lubricate your cables in any cleanliness and serenity. Just before entering the cable in the duct, just ask this tool by having previously filled with grease.
Fat using recommendations on your cables:
-For Throttle cable: very liquid and not sticky grease
-For Brake cable: thick fat
-For Clutch cable: semi thick same sticky grease
This tool allows you to apply the right dose of grease and prescribed tightening the cable in the rubber of the tool using the dial.
Reference: 156261
M6 X 30mm studs that can be used for many applications.
Reference: 8835
Reinforced cable clamp Ø6mm X L.1,3cm for Ø2,2mm diameter cable.
Reference: 252738
Reinforced cable clamp Ø4mm X L.8mm for Ø1,6mm diameter cable.
Reference: CAL01RRD
RRD PERFORMANCES wedge for re-orientation and adaptation of MINARELLI AM6 / DERBI valves / pipe on MOTOBECANE AV10 / MBK 51 engine with POLINI housings.
Reference: 175695
PHBG choke lever control for good quality and cheap.
Reference: 252742
Reinforced cable clamp Ø5,2mm X L.8mm for cable diameter Ø2,2mm.
Reference: 0616
A high-end tool to lubricate your brake cables clutch / or other applications.
Reference: 480346
A good universal reinforced cable that adapts to almost any vehicle.
Reference: 316.0012
Universal starter POLINI different color to choose
Reference: 15 0331
MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.
Reference: 0182.86
Essential piece to pull 2 cables with another directly from the throttle grip or other. Model with 36mm stroke and cable hole / sheath diameter 6.25mm Black color.
Reference: 486932
An ultra complete kit ideal for refurbishing your accelerator, clutch.
Reference: 22 2428B
A high-end accelerator cable to slower wear.
Reference: 2135.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / duct specific 6,80mm diameter with large opening on one side. Brown color.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.