Reference: 423800
Fuel circuit breaker on TNT RACING hose
A good quality circuit breaker at a low price.
Banner
Do you have problems starting in the morning or cold especially during the winter? We have the solution for you, here is the automatic choke TEKNIX with its wiring for scooter 50cc 2-stroke Chinese GY6 or carburettor GURTNER, KEIHIN ....
Good quality, its finish is very correct for the price! In fact, at a lower cost, this part will be ideal for refurbishing your carburetion and avoiding start-up problems. Connects to the original wiring harness, lug with 2 pins. Diameter of the choke part Ø18,5mm choke, center distance 42mm with 6mm mounting hole.
Reference: 423800
A good quality circuit breaker at a low price.
Reference: 1068.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / sleeve 6,80mm diameter. Color gray.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.
Reference: 486936
Reinforced Clamp Ø6mm X L.1cm for cable diameter Ø2,5mm.
Reference: 451421
An essential tool in a workshop to have properly greased cables.
Reference: 296948
Ideal for refurbishing your old used part for cold starts.
Reference: C7417
A complete kit which will be ideal for refurbishing your 2 wheels.
Reference: 252738
Reinforced cable clamp Ø4mm X L.8mm for Ø1,6mm diameter cable.
Reference: 15437
Ideal if you have cold start problems with the scooter, essential piece!
Reference: 0101.02.031
High Clamp range Ø5,5mm, 8mm length for your cable accelerator, starters ...! Model with incoming screw head.
Reference: 0616
A high-end tool to lubricate your brake cables clutch / or other applications.
Reference: 15 0323
MALOSSI T fitting diam. Of your choice. Ideal for adding a recovery lung or other.
Reference: 6536
Gas cable 3x3 size 1m20 suitable for Mbk 51.
Reference: 1628.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 41mm stroke and cable hole / shaft diameter 6,80mm. Red color.
Reference: 15 0331
MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.