Reference: 15 0331
MALOSSI Y connection for hose Ø6 / 8/10 / 13mm of your choice
MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.
Banner
Cold start problem? Here is the solution for you, brand TEKNIX, we present the automatic starter with its wiring for all carburetors DELLORTO PHVA and PHBN scooter PIAGGIO. Good quality, its finish is very correct for the price! Indeed, at lower cost this part will be ideal to refurbish your carburation and avoid the problems of cold start. Connects to the wiring harness of origin, terminal with 2 pins.
Diameter of the nesting part of the starter Ø20mm, with integrated O-ring.
Reference: 15 0331
MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.
Reference: 6536
Gas cable 3x3 size 1m20 suitable for Mbk 51.
Reference: 09 0820
Choke lever control for high quality PHBG.
Reference: 0101.02.031
High Clamp range Ø5,5mm, 8mm length for your cable accelerator, starters ...! Model with incoming screw head.
Reference: 162505
A complete kit that will be ideal for refurbishment of your 2 wheels to improve the aesthetics of your moped.
Reference: 8806 / 515724
Reinforced cable clamp Ø5mm X L.7,8mm for cable diameter Ø2mm.
Reference: 37 3640
MALOSSI cable clamp Ø5.5 X 9mm. Ideal for a secure attachment.
Reference: 423800
A good quality circuit breaker at a low price.
Reference: 2135.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / duct specific 6,80mm diameter with large opening on one side. Brown color.
Reference: 479341
Quality cable for a replacement at a lower cost.
Reference: 162504
A complete kit that will be ideal for refurbishing your 2 wheels.
Reference: 5512894
Housing allowing the passage on a carburettor by misleading the carthography of the motor scooter PIAGGIO 2T with injection.
Reference: R163620160
A complete kit which will be ideal for refurbishing your 2 wheels.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.
Reference: 175695
PHBG choke lever control for good quality and cheap.
Reference: 252742
Reinforced cable clamp Ø5,2mm X L.8mm for cable diameter Ø2,2mm.