Reference: 3115423
Kit 560cc MALOSSI Ø70mm, double cylinder / piston for YAMAHA TMAX 530 2012 to today
A performance monster for your TMAX 530 4 stroke!
Banner
Here is the very last novelty from MALOSSI! Ideal to boost the performance of your maxi scooter YAMAH T-MAX 530 to the maximum, here is the complete Ø38mm MHR throttle body kit!
Made of Ergal 7975-T6 and black anodized, the MHR throttle body has been designed specifically to achieve maximum performance in combination with the 560cc Malossi twin-cylinder kit and with the Double PowerCam , providing the right suction to the engine in this configuration.
The internal diameter of the throttle body widens to 38 mm, while its length remains identical to the original so that it can be installed without difficulty in its standard position between the cylinder head and the airbox.
Its internal ducts are cylindrical against the cones, to gradually become oval in correspondence of the butterfly valve. Thanks to this variation of shape inside, the fresh gases are pushed more energetically into the cylinder head which, presenting two suction valves, requires a considerable width, offered by the oval section, which continues until the end of the manifold .
The specific cones for the MHR throttle body are calculated and improved to obtain the maximum efficiency from the oval sections of the bodies, exploiting the perfect harmonization of the whole duct.
Reference: 3115423
A performance monster for your TMAX 530 4 stroke!
Reference: 423800
A good quality circuit breaker at a low price.
Reference: 460034
CGN fuel circuit cut-off to replace the valve or in the event of wear of the vacuum pump.
Reference: 0616
A high-end tool to lubricate your brake cables clutch / or other applications.
Reference: 15 0651
MALOSSI tee fitting Ø6mm and 8mm. Ideal for adding a lung or other recovery.
Reference: MC12001
Carburettor diaphragm for MINARELLI motor scooter 4T 125, 250 and 300cc.
Reference: 1068.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / sleeve 6,80mm diameter. Color gray.
Reference: 451421
An essential tool in a workshop to have properly greased cables.
Reference: 0101.02.031
High Clamp range Ø5,5mm, 8mm length for your cable accelerator, starters ...! Model with incoming screw head.
Reference: 0182.86
Essential piece to pull 2 cables with another directly from the throttle grip or other. Model with 36mm stroke and cable hole / sheath diameter 6.25mm Black color.
Reference: 173.0001
High pressure POLINI fuel pressure regulator ideal for increasing the performance and reliability of your prepared scooter!
Reference: 1628.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 41mm stroke and cable hole / shaft diameter 6,80mm. Red color.
Reference: 2135.86
Essential piece to get 2 cables with another directly from the throttle grip or another. Model with 36mm stroke and cable hole / duct specific 6,80mm diameter with large opening on one side. Brown color.
Reference: 15 0323
MALOSSI T fitting diam. Of your choice. Ideal for adding a recovery lung or other.
Reference: 15 0331
MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.