Reference: 53129_00
40mm 120 ° angled tube kit for DELLORTO carburettor
Ideal in case of loss or to pass your cable as desired.
Banner
There are 51 products.
Active filters
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 1298
The little room in which hangs the starter cable.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 53002_00
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!