Reference: JAC-07
BARIKIT 1.5mm socket bilge MINARELLI HORIZONTAL (ovetto, nitro, aerox, jog ...)
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Banner
BARIKIT is a Spanish brand that offers a comprehensive catalog of various engine parts for scooters and motorcycles old and new!
BARIKIT is present since the late 90s in Spain, BARIKIT was originally a large piston manufacturer competition or replacing the original, little by little they have diversified into crankshafts, valves, cylinders, cylinder heads, exhaust ... These various parts are outsourced recess and not manufactured by the house BARIKIT, however they innovate in specific outgoing and friendly products with affordable prices, in addition, the material selected by BARIKIT is always good standard! They have also evolved out their range BRK composed of very exclusive piece that are not found in other brands or cylinders FACTORY prepared a hand!
For us the main strength of this Spanish brand remains the diversity of the range, certainly many of their products are found elsewhere as they are not necessarily the primary manufacturers, however there are home crankshafts long runs of all types millet even films for Derbi engines euro 2 specific with balancer, we also find like-cylinder AIRSAL but higher diagrams, with yokes a plot with specific higher-end pistons, there are even thermal group old as MINARELLI RV4, Peugeot 103 and other models!
address:
CAMI PARETS 20
Polígon
El Congost
Telephone (Spain):
938401198
Fax (Spain):
938402295
Website:
www.barikit.com
There are 438 products.
Reference: JAC-07
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Reference: JUN-809C
Ideal for disassembly / reassembly of your high engine BARIKIT 125cc!
Reference: JUN-908
Ideal for disassembly / reassembly of your high engine BARIKIT 250cc in diameter 78mm
Reference: JAC-09
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: TUB-04
Special intake pipe for large diameter carburetors from 26 to 28mm like OKO ... 360 ° swiveling and ideal for large configurations.
Reference: JAC-01
Base wedge for cylinder, thickness 2.00mm. Machined from the mass of aluminum. Ideal on long stroke 43 and 44mm.
Reference: CUL-748
The replacement cylinder head for the BARIKIT Racing cast iron kits in diameter 39.90mm on DERBI EURO 3 and 4.
Reference: S/4T/7800B
A complete set of segments to service your BARIKIT 250cc Ø78mm kits.
Reference: S/4T/6100B
A complete set of segments to maintain your BARIKIT 150cc and 170cc Ø61mm kits.
Reference: P-477
Replacement piston for kits BARIKIT FONTE 70cc Ø47mm on scooters and quads KYMCO 50cc cooling by air or by liquid!
Reference: P-476
Full Replacement Piston for 70cc cast BARIKIT kit on scooter HONDA, KYMCO, BSV ....
Reference: P-380-A
BARIKIT bi-segment piston for CASAL 50 with 4-speed engine.
Reference: P-383-A
BARIKIT bi-segment piston for CASAL 50 with 5-speed engine.
Reference: P-537-A
BARIKIT bi-segment piston for original high engine and BARIKIT on the ROTAX 122 of APRILIA RS, AF1, EUROPA, PEGASO, and other 2 times.
Reference: P-673-S
BARIKIT bi-segment piston for BARIKIT 144cc high engine on the ROTAX 122 of APRILIA RS, AF1, EUROPA, PEGASO, and other 2-strokes.
Reference: LA-812-C
High-end competition valves, aluminum base with carbon slats!
Reference: GC-01
Ideal in case of breakage or wear pronounced your old chain guide.
Reference: CIG-37
Ideal to strengthen your low engine and accompany a 50cc configuration or 70cc kit on your horizontal minarelli motor scooter.
Reference: COJ-63/28
Bearing for various motorcycles and quads.
Reference: COJ-NJ206
Bearing for various motorcycles and quads.
Reference: COJ-6306R/3
Bearing for various motorcycles and quads.