Reference: MB15500040
Idle jet (5mm thread, 12.5mm length) for DELLORTO PHVB carburettors
Indispensable for fine-tuning your settings or simply changing your idle jet.
Banner
There are 36 products.
Active filters
Reference: MB15500040
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 10532_01
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 10375_150
A complete needle with several sizes to choose from to adjust your flow to perfection.
Reference: 09436_170
A complete needle with several sizes to choose from to adjust your flow to perfection.
Reference: 13086_70
Indispensable for fine-tuning your settings or simply changing your idle jet.
Reference: 12630_00
Ideal in case of wear or breakage of your old float carburettor DELLORTO on VHSA and VHSH.
Reference: 53008_00
A pack allowing to pass your carburettors with choke with lever in choke with cable or simply to repair your syteme of starter Special carburettor PHSB and VHSB.
Reference: 13365_00
The aluminum tank with overflow, mounts on all VHSH and VHSB carburettors to remove your jets faster, drain faster and get more strength!
Reference: 53090_00
The idle screw with spring to your VHSB carburetors and VHSH!
Reference: 14206_262
Essential part for the operation of your carburetor, ideal in case of wear or breakage ...
Reference: 04957_00
Indispensable for the maintenance of your tank on carburettor DELLORTO PHSB, VHSA, VHSB, VHSC and VHSH.
Reference: 10544_00
Float balance for essential spare in case of loss or wear your old room!
Reference: 14415_00
The aluminum tank, mounts on all PHSB carburetors VHSB, VHSC, VHSH and VHSG to remove the faster your jets, drain faster and more strength!
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 3013998
A complete transparent tank, quality model for precise control of your VHST carburetor!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 52627.77
A set of gaskets essential for the refurbishment of the sealing of your VHST carburetor.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 1213257B
MALOSSI rubber tulip to improve the venturi effect.