Reference: 01486_72
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
Banner
If you want to preserve a low consumption while having more performance than a SHA or other model for endurance or road for example, the PHBG model will make a very good compromise.
This low-cost carburetor is of very high quality and has a multitude of settings: richness screw, idle jet, needle bushel ...
This model is the AS (also exists in BD model, AD, DS, DD, black edition, or BS), it is rigid mounting with a lever, you can also pass it in choke cable without difficulties.
In relation to the SHA carburettor, this model is much more precise, performing at the recovery, acceleration and peak speed. This model does not have separate greasing.
The carburetor is delivered as such:
Main jet small standard pitch: 88
Needle W06
40 ° cup bushel
Needle well AN 262
Idle jet 50
Choke nozzle 55
Float in 2 grams
For mopeds and old motorcycles 4 Time around 125-175cc (Motoconfort, Peugeot, Terrot, etc).
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 09475_40
The replacement and adjustment bushel for your PHBG carburettors, 30° or 40° cut more aggressive choices!
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09595_20
Needle, essential for adjustments or at the slightest wear, irregularity.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 01488_30
Idle jet for PHBG and PHBD carburettors, to obtain a correct idle when the bushel is at the bottom! With a good reaction to the opening bushel!
Reference: 09501_40
Essential part for the proper functioning of your carburetor, several sizes to choose from to fine-tune your settings!
Reference: 09511_254
Essential part for the operation of your carburetor, ideal in case of wear or breakage ...
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 02571
The AS version of the PHBG in 20mm diameter. Rigid, with lever choke without separate lubrication. Special 4T version.
Reference: 07428
Special 4T agricultural machinery.
Reference: 02519
The AS version of the PHBG in 16mm diameter. Rigid, with lever choke without separate lubrication. Special 4T version.
Reference: 2507
The AS version of the PHBG in 18mm diameter. Rigid, with lever choke without separate lubrication. Special 4T version.
Reference: 2517
The AS version of the PHBG in 15mm diameter. Rigid, with lever choke without separate lubrication. Special 4T version.
Reference: 2555
The AS version of the PHBG in 17mm diameter. Rigid, with lever choke without separate lubrication. Special 4T version.