Here is the damper for mécaboite home MALOSSI MHR, it is simply the best damper market for motorcycle 50cc gearbox CROSS, SUPER-MORTARD and ENDURO. Between axis 290mm.
This model is mounted on the following machines :
-DERBI Senda EVO Super biker or enduro
-DERBI Senda 50cc
-DERBI Senda X-RACE Super biker or enduro
-DERBI Senda X-TREM Super biker or enduro
-GILERA RCR
-GILERA GSM
-GILERA SMT
-APRILIA RX from 2007
-APRILIA SX from 2007
This damper contains the best parameters and the best manufacturing technics. It is adjustable at the spring but also in gas pressure at the wheel. It is obviously delivered with the key MALOSSI adequate. Made at the big PAIOLI in Italy under label especially for MALOSSI. This damper will allow you to absorb bumps, smoothing acceleration ....
Increased handling for more speed on race, especially on machines that have original very limited damping! Aesthetic level, we clearly see an ultra worked piece and racing with the bottle and many anodized parts.
The fundamental characteristic of the RS24 / 10 shock absorber is the presence of an external reservoir which allows a significant increase in the quantity of oil present and therefore a lower heating of this oil under the conditions of maximum stress during the competitions, and which also allows the displacement of the diaphragm in the external tank.
The presence of the external reservoir mainly allows the adaptation of a third piston with the corresponding lamellar block which controls the braking of the stroke of the shock absorber in the compression phase. Compressive braking, a special feature of the RS24 / 10 shock absorber, can be adjusted in 10 positions by acting on the knob on the top of the external reservoir.
Spare parts :
Wedge set with o-rings
.png)
.png)
