Reference: 04033
MOTIP high temperature paint spray bomb transparent varnish 800 ° C for 400ML exhaust
A transparent varnish resistant to 800 ° specially made for high temperature parts.
Banner
ATTENTION the color has changed and the photo is no longer contractual.
Here is a high quality spray paint held at high temperature (650 ° C). This spray will allow you to paint an exhaust or another part and obtain the gray / silver color, distributed by MOTIP! Ideal for giving an aesthetic touch to your exhaust, engine, ...
Have
Advice and preparation :
In order to obtain a painting with an optimal quality, it is advisable to sand the muffler or the part using a very fine sand paper (800gr) until a smooth surface is obtained without defaults. Remember to remove all grease, oil, dust stains, etc. Using a product such as acetone. Then, spray the surface to be painted and make several thin coats (3 recommended) rather than one thick coat. Wait a few minutes between each coat, after these coats the drying time is one hour. Paint at a temperature between 17 and 24 ° C.
This paint must be heated to dry, either using a heat gun or by starting the engine! Have
Reference: 04033
A transparent varnish resistant to 800 ° specially made for high temperature parts.
Reference: 04031
A black paint resistant to 800 ° C specially designed for high temperature rooms.
Reference: 134171
A glossy black paint resistant to 150 ° C specially designed for high temperature parts (special engine block).
Reference: 04037
An anthracite paint resistant to 800 ° C specially designed for high temperature parts such as engine block, engine crankcase, ....
Reference: 04031
A black paint resistant to 800 ° C specially designed for high temperature rooms.
Reference: 04033
A transparent varnish resistant to 800 ° specially made for high temperature parts.
Reference: 171800
Ideal for safe and leak-free mounting of your exhaust.
Reference: 36959
Resistant white paint 800 ° to specific parts high temperatures.