- -8%
Reference: 35 7259
Set of 2 segments chrome for kit MALOSSI aluminum 70cc Ø47mm
Ideal in case of loss of compression and to put your high engine to nine.
Banner
Not approved, formally prohibited on the road, reserved for competition and closed circuits!
The kit MALOSSI MHR Replica 70cc is a kit based on very high performance and maximum strength. This kit has a bore of Ø47mm and is made of aluminum treated nikasil, this nikasil coming out of MALOSSI is the most solid of the whole market hence the reputation of the aluminum cylinders of this great Italian brand.
Designed for the track and the 70cc trophy, it is very torquey and stunt lovers will be delighted. MALOSSI in order to solidify this kit has installed a luxury model bi-segment piston with side grease and rear light to improve the sweep, with 2 segments hard chrome domed, this action aims to amplify the torque but slows the race and the high regimes. MALOSSI announces 7.35nm (0.75Kgm) at 8000rpm (rpm)!
The cylinder has an intake 6 transfers modified and completely revised and corrected, a large extended exhaust booster, diagrams very high and sharp, the bore is perfect and worthy of the largest cylinder! MALOSSI announces 9CV at 8,500 rpm on this kit, you can expect more or less depending on your configuration and settings. The cylinder head is in high compression monobloc (compression ratio of 13.8: 1), the chamber is frustoconical shape polished, this cylinder head is mounted on O-ring for more security.
Clearly, this kit is a small monster of torque that does not neglect high diets, it is very powerful but does not neglect the strength, its finish and its study are very advanced. We recommend it to ride every day (except France), for the competition that requires solid motors, the stunt, ... It is obviously delivered complete with a needle cage reinforced 10mm axis and slats of KARBONIT (black fiber) for regulate intake and increase performance, plugs with Ø4,8mm int. collars, ...
We recommend to accompany this kit at least : racing exhaust adapted, full kit carburation Ø21mm, reinforced bearings kit game C3 or C4, reinforced crankshaft, cold racing candle, ...
This pack contains:
Aluminum cylinder Ø47mm nikasil
Two-piston piston
X2 hard chrome plated segments Ø47mm
Piston pin Ø10mm
Piston clips in C
High compression cylinder head Ø47mm
Reinforced needle cage
Complete seal pack
KARBONIT flap covers
Stopper with clamps for antifreeze on cylinder head
stickers
Explanatory note (booklet)
Spare parts:
Double-piston piston d.47mm axle 10mm
Complete seal pack
Set of slats of valves
10mm axle with G-clips
10mm axle with C-clips
Ø10mm clips in C
Ø10mm clips in G
X2 segments
Cylinder head Ø47mm
Cylinder
Caps for cylinder head with collars
Needle cage reinforced Ø10mm
Optionally we offer a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the bottom of skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on :
2 stroke engine scooter minarelli horizontal liquid
Motor 2 Time scooter minarelli horizontal air spent in liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
APRILIA SR NETSCAPER 50 LC
APRILIA RALLY 50 LC
APRILIA SR RACING 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 PHATOM LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JOGRR 50 LC
Reference: 35 7259
Ideal in case of loss of compression and to put your high engine to nine.
Reference: 27 7054.K0
Ideal for fine-tuning your settings and improving your performance!
Reference: 36 6941
Ideal for the refurbishment of your engine!
Reference: 1012877
Ideal for plugging carburettor air intakes or cylinder head.
Reference: 11 8287C
Pack a few seals available !!!
Reference: 34 8446
Ideal in case of loss of compression and maintenance of your MALOSSI high motor.
Reference: 38 8186
Spare cylinder head MALOSSI MHR for Replica 70cc in diameter 47mm.
Reference: 06 8187
Pack a few seals available !!!