Reference: 206.0370
Set of 2 segments Ø40,3mm for kits 50cc POLINI cast iron on minarelli am6
2 segment POLINI high-end, ideal in case of maintenance of your kit POLINI cast iron.
Banner
Homologated on the road, respects the displacement of 50cc!
Here is a small 50cc RACING kit from the house POLINI MOTORI, this 40.3mm diameter cast iron model will bring you additional performance compared to the original and it will preserve strength, reliability and this for a low price!
It is ideal to start afresh by improving its acceleration and its top speed, POLINI has greatly worked on this high engine, the channels are modified but the transfers to the base remain identical to the origin.
The piston is a reinforced model with two thin segments including a domed chrome for the top of the piston.
The cylinder head is a high-chamber frustoconical model with a polished finish. To further improve the quality, POLINI has to pass its cylinder head in O-ring.
The pack contains:
-Cylinder cast iron Ø40.3mm
-Aluminum cylinder head Ø40.3mm
-Piston reinforced bi-segments Ø40.3mm
-2 thin segments including a domed chrome for the top of the piston
-Muffler flange
-Crab type piston clips
-Reinforced piston pin
-Pack attached
-Notice
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
This high engine is mounted on the following 50cc motorcycles with gearboxes equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA MX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-BETA CRE
-BETA RR
-BETA RR ALU
-HONDA HM
-HONDA CRE
-HONDA BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM
-MALAGUTI XSM
-FANTIC CABALLERO
- PEUGEOT XP6
- PEUGEOT XPS
- PEUGEOT XP STREET
- PEUGEOT XP STREET EVO
- PEUGEOT XR6
- PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
And many other machines!
Reference: 206.0370
2 segment POLINI high-end, ideal in case of maintenance of your kit POLINI cast iron.
Reference: 204.0950
The piston POLINI 50cc POLINI cast kit for minarelli AM6.
Reference: 3112199
A 50cc kit very powerful and solid, ideal for driving every day with reinforced crankshaft, 21mm carburetion, racing exhaust ...
Reference: 011332403
The luxury version of the AIRSAL 50cc in two-segment, a powerful, solid, torquey kit and above all with an attractive price, very good basis for engine preparation.
Reference: IM1
New range of MVT cylinders for your MINARELLI AM6 engine!
Reference: P400130100006
A powerful and very solid kit, the ATHENA is a great companion to ride every day, a high quality engine based high speed.
Reference: EQ-922-S
High complete engine ideal for respecting the 50cc displacement and circulating every day with an efficient kit 5 transfers, bar exhaust, high compression cylinder head with incoming stud, mono segment piston ...
Reference: 478325
Ideal for refurbishing your high CPI engine.
Reference: 032065
Here is a top engine of very good quality much cheaper than the origin which offers better heat dissipation, less friction...
Reference: 491302
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: 220399
Here is a high quality good motor much cheaper than the origin which offers better heat dissipation, less friction ...
Reference: 9916770
A high complete engine, solid and efficient. Ideal for moving around every day.
Reference: 133.1011
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: 11000168
An excellent 50cc kit, very powerful and very robust, ideal for competition as for the road!
Reference: H011381403
A kit a bit more powerful than the original while maintaining excellent reliability for a completely ridiculous price.
Reference: 013006476
The deluxe version of 50cc AIRSAL bi-segment, a powerful kit, strong, torquey and especially with an attractive price, very good engine preparation base.
Reference: CK.44.492.G2
A very powerful kit with a specific admission has 6 lateral transfers and a stud bolt! Performance level! To put with the POLINI and MALOSSI!
Reference: 480587
An excellent 50cc kit which will bring you performance and reliability! Surely one of the best value for money on the market.